|
1-800-369-9598 (USA)
|
|
|
|
|
|
S586. Round Needle Nose Pliers
Round Needle Nose Pliers
Joe Vitolo uses these pliers to quickly adjust the brass flange of an oblique holder to fit specific nibs and to adjust the angle of the nib to the paper. 4.5".
|
|
|
|
H50. Blackwell Holder
Blackwell Oblique Holder
A remarkably simple design that holds most pen points for
Spencerian and Copperplate. Finely crafted wood holder with a sturdy brass oblique arm. Designed to hold the nib at a less steep slant angle for ease of upstrokes. Also available with a plastic holder. (Works with most all nibs except crowquills and the very largest vintage nibs).
|
|
|
|
H61. Blackwell Plastic Handle Oblique
Plastic Handle Blackwell Oblique Holder
Black plastic hour glass holder with the same brass flange for holding the nibs. The brass work is not as finely finished, but is just as functional.
|
|
|
|
H51. Century Oblique Holder
Century Oblique Holder
These gorgeous turned wood pen holders have a metal flange. They are made to hold the Gillott 303 and Hunt 101 (and similar sized nibs). They can be adjusted with needle
nosed pliers to fit other nibs.
|
|
|
|
H52. 5/8in (Thicker) Century Oblique
5/8" Century Oblique Holder
Joe Vitolo has modified the design of the Century Oblique Holder. The thicker holder may reduce hand fatigue.
|
|
|
|
H48. Peerless/Ziller Oblique Holder
Ziller Oblique Holder
These less expensive oblique holders are pre-adjusted for our most popular pointed nibs.Metal flange, grey plastic handle. Specify Gillott 303, Gillott 404, Brause 66EF, Hunt
101, Nikko G, EF Principal. This holder can be adjusted for virtually any nib. Please let us know the nib you use & we will pick the closest holder.
|
|
|
|
H23. HOLDER: Hunt Oblique
Hunt Oblique Holder
Plastic hourglass shape with offset for nib. For Gillott 404, 303, 290, 170, 1068A,1950, and Hunt 108, 101. Brause 66EF and Hiro 40 can be used, but they better suited to specially made holders listed below.
|
|
|
|
H59. Del Tysdal Oblique Holder
Del Tysdal Holder
Zanerian style rosewood holder. Metal oblique arm holds nib. 8.25".
|
|
|
|
S507. Bent Needle Nose Pliers
Small Bent Needle Nose Pliers
Michael Sull selected these small pliers which are ideal for adjusting the flange on an oblique holder. Use them to adjust the curve of the flange for the nib you are using, to crimp the two sheets of metal in the curve a bit tighter if necessary, and to adjust the flat part of the flange to reduce the angle of the pen to the paper. They are small enough to fit in your pen pouch or traveling tool kit.
|
|
|
| |
© John Neal Bookseller · 1833 Spring Garden Street · Greensboro · NC 27403 · USA
|
|
|
