|
1-800-369-9598 (USA)
|
|
|
|
More Bookbinding Materials: Adhesives & Glues - Board & Paper Cutters - Book Cloth - Book Presses - Davey Board & Book Board - Japanese Punch Drill - Needles & Thread - Bone Folders
|
|
S347. Bookbinding Awl
Bookbinding Awl
3-1/4".
For punching holes in signatures. Finer shaft than our other awl.
|
|
|
|
S255. Bookbinder's Awl
Small Bookbinder’s Awl
Small awl with a wooden handle for punching holes in paper and thin board.
|
|
|
|
S234. Stylus
Stylus
This inexpensive tool can be used to punch holes in a few sheets of paper before sewing. Sturdy all metal construction. Great for beginners’ classes because of its low cost.
|
|
|
|
S348. Japanese Push Drill Set
Japanese Push Drill. Now with 9 drill bits!
Hollow point drills cut holes in papers, leathers, and binders
board. Pressure on wooden shaft causes drill to spin and cut hole. Set of 9 interchangeable drills: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5.0 mm. A marvelous tool worth the price.
|
|
|
|
S370. Japanese Drill Bit
Sizes 1.0 and 1.5
|
|
|
|
S371. Japanese Drill Bits
Sizes 2.0 and 2.5
|
|
|
|
S372. Japanese Drill Bits
Sizes 3.0, 3.5, and 4.0
|
|
|
|
S349. McGill Paper Drill Single Hole
Single Hole Paper Drill. List Price $31.45
For binding projects, this easy to use Paper Drill cuts clean holes. It effortlessly drills 1/4" diameter holes through a small stack of sheets. Maximum capacity of 250 sheets of 20lb paper. Adjustable hole positions. McGill Model 56000.
For smaller holes purchase one or more additional 1/8" drill units and switch out the standard 1/4" drill unit.
|
|
|
|
S358. McGill Three Hole Paper Drill
Three Hole Paper Drill. List Price $62.95
For binding projects, this easy to use Paper Drill cuts clean holes. It effortlessly drills two or three holes, 1/4" in diameter, through a small stack of sheets. Maximum capacity of 250 sheets of 20lb paper. Adjustable hole positions. McGill Model 57000.
For smaller holes purchase one or more additional 1/8" drill units and switch out the 1/4" ones that are standard.
|
|
|
|
S357. 1/8inch McGill Drill Head
This replacement drill head can be used in place of the standard 1/4" head on either of the McGill paper drills.
|
|
|
| |
© John Neal Bookseller · 1833 Spring Garden Street · Greensboro · NC 27403 · USA
|
|
|
